Friday, September 10, 2010

Optimal Fetal Positioning, Part 3 - Putting the Pieces Together

In my first blog post on Optimal Fetal Positioning I focused on the dimensions of the human pelvis. With my second post, I explored the shape and angles of the fetal head. This next post on OFP will be bringing these two parts together, showing how well they can fit when things are done right.

CARDINAL MOVEMENTS

The way a baby moves through the mother’s pelvis on its exit from the womb is described as the “cardinal movements.” The cardinal movements always begin with the fetal head in the LOA position, though sometimes babies do not go that route. The reason why LOA is the most described starting position is as follows.
As the baby enters the inlet of the pelvis, the widest diameter is transverse – from side to side. The baby’s head, when flexed well (or even when not), will be wider front to back. So, the best way for the baby’s head to enter the pelvis is in a sideways, or OT position.

INTERNAL ROTATION

As the baby is pushed further into the pelvis by the power of the contractions, and enters the pelvic cavity, the dimensions change. The cavity is more equally rounded, and since body movements tend to move in a clockwise direction (I’ll explain this more below), the baby is rotated from LOT to LOA.



EXTENSION

The pelvic cavity is where head flexion really has a big impact. With an equal diameter of 12 cm, a well-flexed head will have a much more successful journey past the ischial spines than an extended head with an 11-13.5 cm diameter. As the baby moves through the cavity, it will continue its rotation from LOA to OA.



EMERGING

Once the baby has moved through the pelvic cavity, the front part of the pelvis basically disappears with the pubic arch. But the sacrum and coccyx at the back are still creating a posterior resistance. The pelvic outlet is absolutely wider from front to back than to side to side. But, if mom is in a position that allows free movement of the sacrum and coccyx (side-lying, hands and knees, upright/squat), the front to back opening will be even greater as the baby pushes the sacrum and coccyx back. This anteroposterior opening creates a space that favors an OA position for the baby’s head.




CROWNING

As the baby’s head moves through the pelvic cavity, and under the pubic arch, on the outside of mom’s body we see the baby start to crown. Through the pelvis the baby has rotated from LOT to OA, and when the baby’s head is born, the baby is usually looking toward mom’s back

EXTERNAL ROTATION/RESTITUTION

The baby’s head has already gone on its internal rotational journey. As the head emerges, the shoulders follow with their own rotations. The shoulders enter the pelvis side to side, because they are widest that way, which puts the baby’s head in the OA position. As the shoulders move through the tight pelvic cavity, the body spins clockwise, and on the outside you’ll see the baby’s head turn toward its mother’s right leg.

As the shoulders move through the pelvic cavity, the rotation continues until the shoulders are front to back, this being the widest diameter of the pelvic outlet. Because of the pubic arch, the anterior shoulder will emerge first, followed by the posterior shoulder. The baby usually continues rotating until its facing up as the rest of the body is born.













BACKING UP

What I’ve just described is the best way that a baby fits through the twists and turns of the maternal pelvis. The two were designed to work together in this manner and allow the baby and the mother to remain intact. Getting a baby to this starting point is what optimal fetal positioning is all about.

DEXTROROTATION

Why does it matter if the baby starts in a left position or a right position? Inside the body, there’s a certain phenomenon that takes place called dextrorotation. This describes the body’s tendency to have its processes move in a clockwise direction. Our uteri move the same way. As the uterus contracts and releases, babies are turned in a clockwise manner. If a baby were to start out in an ROA position, this would mean that the baby would need to rotate all the way from ROA to ROT to ROP to OP to LOP to LOT to LOA. That’s quite a long journey and includes a nice length of time moving through the posterior position, which can be extra painful for many mothers. Starting out in the LOA position means that the uterus can focus on pulling open the cervix and moving the baby down, instead of also working on getting a baby into a good position.












GETTING A GREAT START

One of the best ways you can help start labor off right is by paying attention to your body movements in pregnancy.
Consider the way your spine curves. Most of us are lazy when we sit, especially if we like to sit in comfy seats such as couches and overstuffed chairs. In these places, we tend to tilt our pelvis back and curve out our lower spine, rolling our shoulders forward. Because the back of the baby’s head is heavier than the front of its head, sitting in slouched or reclined positions allows gravity to turn your baby to a posterior position, and the baby’s back is curved nicely along your curved back. If you were to sit with the pelvis tilted forward instead, your lower spine would have a nice curve inward, and your body would be more upright. This would allow the uterus to move forward, the baby to fit itself along the curvature of your spine, and the heaviest part of the baby’s head would then be toward your front.



Friday, August 6, 2010

Optimal Fetal Positioning, Part 2 - The Fetal Head

In the first blog entry on Optimal Fetal Positioning, I discussed the shape and variations of the first participating body part of OFP – the maternal pelvis. Before we discuss how Optimal Fetal Positioning really works, I need to explain the next participating body part – the fetal head.

As with the maternal pelvis, the fetal head is made up of various mobile bones that form a variety of shapes and sizes. Because babies’ heads move in different directions, both on their bodies, and in relation to the mother’s pelvis, I’m going to break down the different ways we describe the fetal head.

“Attitude”


The first part of the baby’s head position to consider deals with “attitude”. This describes the amount of flexion or extension of the baby’s head, or how tucked the baby’s chin is. Why is flexion important? The amount of flexion going on will alter the diameter of the baby’s head as it moves through the pelvis, the cervix, and through the vagina. A cervix opens only as far as it needs to fit around the baby’s head. If the diameter is small, it will only need to dilate that amount. If the diameter is larger, then more dilation will need to occur. . A well-flexed head is a baby whose chin is tucked well into its chest, with the occipital (or back of the head) bone as the presenting part. From here there are varying degrees of flexion and extension.

Complete Flexion: this is the optimal position for a baby’s head to be in. The angle of the head and neck are less than 90 degrees, baby’s chin is tucked well into it’s chest, and the very back of the head presents first. The diameter of a completely flexed head, the suboccipitobregmatic diameter, is measured from just below where the occiput starts out to the center of the front fontanel. This diameter is about 9.5 cm







Moderate Flexion, or Military Attitude: with the military attitude, the baby’s head and neck are at a 90 degree angle, as if the baby is looking straight forward. The diameter of a military attitude, the suboccipitofrontal diameter, is measured from just below where the occiput starts to about the center of the forehead. This diameter is about 10 cm






Extended or Brow Presentation: this attitude has the baby’s head tilted back a bit, the angle of the head to the neck greater than 90 degrees. The diameter of brow presentation, the occipitofrontal diameter, is measured from the occiput start at the back of the head to about the eyes or the brow. The diameter is about 11.5 cm.
















Hyperextended, or Face/Chin Presentation: this attitude has the baby’s head tilted way back and can be referred to as “star gazing”. The diameter of a hyperextended attitude, the mentovertical diameter, is measured from the tip of the chin to the highest point on the back of the head on the vertex. The diameter is about 13.5 cm.







As you can see, the variation in diameter of the fetal head is great in relation to how well flexed is the baby’s head.

Fetal Head Bones/Molding

So, can an unflexed head still fit through the pelvis and birth canal? Though it often takes more time and effort, yes, an unflexed head can still fit through!
Many pregnant women cringe when they think about pushing out a newborn baby’s head through their vaginas. How could something so large come out of something usually so small, they may wonder. While the majority of that topic can be turned into a blog post all on it’s own, for the sake of this blog post on OFP, we will discuss how the baby’s head can change size in order to fit through the mother’s pelvis.
We’ve already talked about how the attitude of the baby’s head alters the diameter of the presenting part. But, what if the baby comes down in one of those suboptimal positions, or what if the baby really does have a large head? The wonderful thing is, we were designed to deal with this as well. Just as the maternal pelvis can expand to allow more room, the fetal head can contract to take up less room.













The fetal skull is formed from five main bones – two frontal bones, which make up the forehead area; two parietal bones, which make up the majority o fthe skull; and the occipital bones, which makes up the very back of the skull, protecting the spinal cord.

The adult human skull has a static shape – it is not going to change unless the bones are broken. But from fetus up until eight years of age, the sutures between these bones have not yet fused. These unfused bones and the fontanels, or small gaps, between the bones, create a skull with the ability to shift, bones overlapping bones, reducing the diameter of the skull. This ability can even allow a malpositioned baby to fit through his mother’s pelvis. I’ve seen some pretty amazing coneheads in my practice! The ones that are always so amazing to me are those that cone at an angle, or off to the side of the baby’s head. It amazes me that we are able to adapt so well; that vaginal birth really is very accommodating!

Fetal Head Position

Fetal head position is different than the attitude of the head. The attitude deals with moving the head up and down from the neck. Position deals with the direction in which the head (and the body that follows) is facing.

When discussing fetal head position, the occipital bone – the one at the very back of the head – is always what is used as the point of reference. We describe the fetal head position as which direction of the mother is the fetal occipital bone pointed toward.

The front portion of the mother is called the anterior. The sides are called transverse. And the back portion of the mother is called the posterior. So, if the back of the baby’s head is pointed toward the front of the mother, the baby would be in an occiput anterior position
















The various fetal head positions are as follows:

ROA (Right Occiput Anterior)
ROT (Right Occiput Transverse)
ROP (Right Occipital Posterior)
OP (Occiput Posterior)
LOP (Left Occiput Posterior)
LOT (Left Occiput Transverse)
LOA (Left Occiput Anterior)
OA (Occiput Anterior)

Tuesday, July 27, 2010

Optimal Fetal Positioning - How Baby's Position Can Alter Your Labor

The words "Optimal Fetal Positioning" may sound like technical jargon to many, but to my ears they are the sound of hope and relief. While my beliefs about birth are mostly rooted around the ideas of keeping hands off of the pregnant mama, and letting the laboring mama and the baby inside do the work they were made to do, understanding the way our bodies were designed can lend an enormous amount of insight into what makes labor work, and what doesn't.

When dealing with optimal fetal positioning, we mainly focus on two parts of the participating bodies. The mother's pelvis, and the baby's head. Now, of course, these body parts do not function on their own, and are intricately connected to the entire rest of the body; but for now, we're going to break it down into these two parts so that we can have a better understanding for how this works.

Part 1: The Pelvis

Most scientists will concur that the human birth process has evolved into a series of compromises. As humans became bi-peds, our pelves narrowed. In order to walk upright, we gave up the ability to birth with the ease of a wide pelvis; a pelvis that would essentially allow us to release our babies without any pushing. Whether you are of a scientific mindset, agreeing with the degrees of evolution that have brought humans to this point in history, or more of a faith-based mindset, agreeing that a Creator had a perfect plan for how a baby would come out of it's mother, the fact remains that this process works - when done right.

The pelvis is a complex and dynamic set of bones. It cannot be defined by one shape or size. It is both wide and narrow, short and long. And it has the ability to alter its shape! What is so wonderful about all of this, is that babies heads and bodies are still able to maneuver their ways through the various turns and twists of the pelvis, and still find their way out!

Pelvic Diameters

There are four main types, or shapes, of pelvises among humans, but they all have the same basic structure of the inlet, the cavity and the outlet. The diameters of each of these parts of the pelvis differ significantly.



The inlet of the pelvis is about 11-12 cm from front to back, and 13-13.5 cm from side to side. When I get to discussing the baby's head, you'll see why this is significant. For right now, I'm just talking about the structure of the pelvis.





The pelvic cavity is the narrower part of the pelvis. It has a more equally rounded diameter, each direction being about 12 cm wide. The ischial spines, the boney prominences that make up the narrowest part of the pelvis, are typically 11 cm apart.




The pelvic outlet is narrower side to side than it is front to back. The transverse diameter is about 11 cm. The anteroposterior diameter on an immobilized pelvis is about 11.5 cm. The amazing thing about the pelvic outlet is that the joints that hold the lower pelvic bones together are quite flexible. If a mama is allowed to be upright, and baby is able to press it's way through, the sacrum and the coccyx are able to move freely and will open up as the baby's head comes through the pelvis, creating an additional 3.5 cm of space!
























Different Pelvic Types

With about 50% occurance, the most common pelvic type among women is the gynecoid pelvis. This pelvis type is the ideal shape for childbirth, with a rounded pelvic brim, blunt ischial spines, round sciatic notch and a pubic arch of about 90 degrees.

The next common pelvic type, occuring in about 25% of women, is the anthropoid pelvis. The pelvic brim on this pelvis is wider front to back than it is side to side, the ischial spines are blunt, sciatic notch is wide and the pubic arch is greater than 90 degrees. This type of pelvis is common among women who are tall and have narrow shoulders. Because of the shape of this pelvis, it is common to have posterior positioned babies.

About 20% of women have the next type of pelvis, the android pelvis. This pelvis is similar in shape to the male pelvis and tends to be more common in women who are short and stockily build. The pelvis is heart shaped, making it more likely to have a posterior positioned baby. Because the ischial spines are prominent and close together, the baby's descent may be slow late in labor.

And the final type of pelvis, occurring in only about 5% of women, is the platypelloid pelvis. This type of pelvis is kidney shaped, being much wider side to side than front to back. The ischial spines are blunt, and the sciatic notch is wide. Because of the width of this pelvis type, the baby may need to tilt its head in an asynclitic position in order to engage into the pelvis.

No matter which type of pelvis you have, each of these pelvis types are able to give birth to a baby! Why? In the next section you'll learn how amazing the fetal head is in relation to fitting in tight places.

Thursday, January 21, 2010

How Healthy Are We?

This year marks the end of the second “Healthy People” decade. Healthy People is a program that puts together an extensive set of 10-year health goals for our nation with the intention of promoting health for America. Various government agencies, along with outside organizations, have worked together to come up with goals that are of the highest priority for our nations’ health.

Being in the field that I am in, I am always eager to see the goals they set for maternal and infant health, along with how we do in meeting those goals. Of specific concern to me is how they view the rate of cesarean sections.

In the Healthy People 2000 set of goals, a target of a 15% total cesarean rate was set for our nation, with a 12% rate for first time, low risk (full-term, singleton, vertex presentation) moms, and 65% target for repeat cesareans. The actual numbers were an improvement from what they had started at, down to 21.8% for total, 15.7% for first time moms and 66.4% for repeats, but did not meet the intended goals.
For Healthy People 2010, you may notice that the target rate went up. The goal for first time cesarean section was set at 15%, and target repeat cesarean was for 63%. A few points difference, but when you take into account how many thousands of women those points account for, that’s a lot of cesareans. We do not have any comprehensive data on these statistics any more current than 2007, but if we are continuing along the trend we see from that year’s rates, we are far, far, FAR from our goal! Last I heard, our overall cesarean section rate was around 31.8 %.
That’s more than twice the intended rate.

So, what’s going on here? Our health agencies and organizations believe that reducing the rate of cesarean sections is imperative for improving the health of our nation, but we are moving away from our goals in this area.

Why is a low cesarean rate an indication of a healthier nation? Isn’t cesarean a life-saving technique? Yes, it is. Having access to technology that can be used in emergencies is an indication that our country is advanced, but the use of these procedures does not mean that we are healthier because of our advancements. My belief is that we are too quick to use our advanced techniques when low-tech approaches could work just as well, if not better. If our high cesarean rates are a reflection of the number of emergency births that take place, there is something seriously wrong happening. Our women are becoming very unhealthy if one-third are unable to birth their babies. Our babies are becoming very unhealthy if one-third are too distressed to be birthed. Not only is our high cesarean section rate an indication of poor health prior to birth, but it increases health risks following birth, creating a new epidemic of young women with fertility problems, uterine problems and needing hysterectomies. If it is true that one-third of our nation’s births are emergency situations, we need to back WAY up and figure out how we can help women become healthy prior to, and throughout their pregnancies. We need to figure out how to grow healthy babies and promote that.

My question for Healthy People is how they intend for these goals to materialize into action? It’s one thing to set a goal, it’s quite another to make a plan of action and follow it. What is the point in setting these rates when there is no plan also set in place in how to achieve them?

Healthy People states that they are “grounded in the notion that establishing objectives and providing benchmarks to track and monitor progress over time can motivate, guide and focus action” but this is clearly not the case in obstetrical care. Though the “Mother-Friendly” and “Baby-Friendly” stamps of approval were established as an incentive to practice evidence-based, goal-meeting, care in hospitals, in the 14 years that these guidelines have been established, I can only find 86 hospitals in the entire United States that can claim being Baby-Friendly, and have yet to find one Mother-Friendly award.

Do we just not care? On the one hand, we see it important enough to list in our health priorities, but on the other hand, the shows we watch, the organizations that are respected, and the numbers themselves all show us that we really don’t care enough to do anything about it. Instead of it being seen as a medical emergency, cesareans are beginning to be seen as the norm.

Setting a goal without a plan of action is like saying you want to lose ten pounds and then continuing your life as you always have. If you want to lose weight, you need to make an effort and have a plan of what you are and are not going to do. The same goes with the Healthy People goals. Just setting a goal is not inspiring enough to the obstetricians in our nation. They need steps to guide them.
So, let’s look into the cesarean epidemic. Why are our rates so high? Why do they continue to climb when our goal is set for something much lower?




The first thing we need to do is address the top reasons for medically necessary cesarean sections.

1. A Previous Cesarean
Well, the easiest way to avoid this is to avoid the first cesarean! But, since that’s not always an option, we need to look into the reasons why a primary cesarean necessitates a repeat cesarean. Research shows that the risks of a vaginal birth after cesarean are much less than the risks of having another cesarean section.
A previous cesarean should not automatically place a woman in need for a repeat cesarean. The opportunity for women to have a vaginal birth after cesarean (VBAC) needs to be supported and encouraged.

2. The Baby is Too Big
This is a commonly given reason for a truly rare problem. American women, with their access to plenty of nutrition, should not be suffering from debilitating bone growth conditions, such as rickets, which would inhibit their ability to birth a baby. American women, in general, have pelvises that are perfectly suitable for passing a baby.
The problem lies in a misunderstanding of a pregnant woman’s anatomy, physiology, hormone production, and the baby’s role in his exiting.
 A woman’s production of relaxin and hyaluronidase during the last part of
pregnancy and throughout labor loosens up the ligaments of the pelvis, enabling it to stretch and move a lot more than a typical non-pregnant pelvis. As a side note, dehydration can decrease hormone production, so do not restrict access to fluids.
 A woman needs to be able to move in labor in order to allow the baby to navigate its way through the twists and turns of the pelvis. This is best done if a woman is upright and has the use of her legs.
 Squatting during pushing can open the outlet of the pelvis by more than 10% to allow more room for a descending baby.
 Physiological pushing ensures that mom is not wasting energy and only pushing when she and baby are truly ready.
 A well-toned pelvic floor can encourage a proper head flexion of the baby to allow for the smallest diameter of the head to lead the way out.
 Allowing enough time in labor and encouraging movement with the mom will help baby get into a good exit position, rather than rushing a baby down into a more difficult position.
 Not rushing a labor, and letting it progress on its own time will help with the baby’s head molding into a shape that fits through a mother’s pelvis.

3. Breech Baby
Delivering breech babies vaginally has been taboo for so long now, that it has come to the point where there are very, very few doctors who even know how to deliver a breech baby. Preventing breech babies should be the first consideration, followed by more attempts at delivering breech babies vaginally. The best ways to discourage a breech presentation are through the following:
 Have an extensive knowledge of optimal fetal positioning, and practice it throughout the end of pregnancy and in labor.
 Make time for body work such as chiropractic adjustments, craniosacral therapies, myofascial release, massage therapy, acupressure, acupuncture, and physical therapy.
 Have a practitioner who is good at palpating to have an understanding of how the baby lies, or do it yourself through belly mapping.
 If baby is not moving through home techniques and body work, try an external version.
 Allow mom to go into labor and utilize the wide range of movements to allow for baby to turn in labor.

4. Transverse Baby
A transverse baby is a problem indeed. A baby truly cannot come out of his mother shoulder-first. To reduce the likelihood of this position, the guidelines for preventing a breech presentation apply to transverse presentation as well.

5. Placental Problems
We cannot prevent all, but a healthy lifestyle and good nutrition prior to conception and throughout pregnancy, will greatly reduce these issues. Mothers with previous cesareans are at greater risk for placental problems due to the scar tissue acquired from the cesarean.

6. Slow or Arrested Labor
Failure to progress is one of the most common reasons for cesarean sections. The reasons why labors slow down or stop are so various it’s hard to address the issue unless you know all the little details surrounding each woman’s circumstances. But here are some basic things to consider.
 Starting a labor with artificial means increases the chance of a labor stalling out, because sometimes, a body just isn’t ready! Letting moms go into labor on their own will increase the chances of labors happening at a time when both mom and baby are ready.
 Women in labor are incredibly sensitive to what’s going on in their surroundings. Privacy is vital in order for a woman’s body to follow the natural course of labor. If she does not feel safe or respected, her body will shut down the labor process. Being respectful, quiet, and calm around a laboring woman will help to support her through the process.
 Encouraging movement and walking throughout labor can help a labor along. Studies show that it can shorten the length of labor by 25 %. Walking opens the inlet of the pelvis, allowing room for the baby to descend and move into a good position.
 Epidurals are known to slow down labors when given too early, or just as a reaction in some women. Using natural pain coping techniques can be effective in managing labor pain, as well as helping labor progress at a steady rate.
 A body that is well nourished and has the strength and stamina to endure hours of labor will be less likely to wear out and give up. Encouraging good nutrition and exercise throughout pregnancy can give women a better chance of a healthy labor.
 The presence of a supportive birth partner has been shown to shorten labors by 25%. Encourage participation by husbands, partners, and the use of doulas.
 If a woman is not in good active labor, she should not be wasting her time in the hospital! Being admitted at an early stage of labor can cause boredom, stress, excessive use of medication and fear, all of which can slow and stall a labor.
 In about 1/3 of labors there is a phenomenon that occurs called the Natural Alignment Plateau. During this time, contractions may continue but dilation does not happen, or contractions may stop all together. While dilation is not occurring, progress may still be occurring. Muscle revitalization, hormone production, a baby changing position, head molding, the release of fears, colostrum production – these are all ways in which progress can be made while dilation is not occurring. Staying patient while this occurs can lead to a labor which ends in rapid dilation (once all of the unseens are taken care of, things tend to move quickly). To force a labor forward that is experiencing a natural alignment plateau may be interfering with processes that are vital to the mom, baby, or both.

7. Umbilical Cord Prolapse
A cord prolapse is a true emergency situation. The umbilical cord is the baby’s lifeline while it is in utero. If the cord slips down past the baby’s head and gets pinched or compressed, the baby’s oxygen source is cut off.
> One of the ways to avoid a cord prolapse is to not artificially rupture membranes, especially early on in labor. Early ruptures are at a higher risk of cord prolapse because the baby tends to still be high in the mother’s pelvis, allowing more room for the umbilical cord to slip past.
> Avoiding internal exams during pregnancy and excessive exams during labor can help prevent early rupture of membranes. Each time an exam is done, bacteria from the birth canal is pushed up toward the bag of waters. This bacterium can eat away at the membranes and increase the likelihood of an early rupture.
> Healthy diet throughout pregnancy helps to create a strong membrane that is less likely to rupture early on.

8. HIV or Genital Herpes

In this instance, preventing the diseases prior to pregnancy is a must. Continued education on abstinence and safe sex practices needs to be encouraged. Women with genital herpes may still be able to have a vaginal birth if they are able to suppress a herpes outbreak at the time of birth.

9. Multiple Births
Multiple births seem to be on the rise now that infertility treatments have become so readily available. In order to grow healthy multiples, a healthy diet and lifestyle is absolutely necessary. Just because there’s more than one baby growing in the uterus this should not automatically put mom in the cesarean category. Vaginal birth of multiples is possible and should be attempted. Because of the increased likelihood of a breech presentation with multiples, vaginal breech deliveries need to be revived and doctors should relearn this practice.

10. Fetal Distress
The majority of cesarean sections I know of are a result of fetal distress. This is a scary situation. Why are so many babies unable to handle the rigors of labor? If this was the intended way for babies to come out, shouldn’t they be able to endure contractions and birth? While contractions and exiting through the vagina is the way that our bodies and babies are intended to work together, the rest of the labor story tends to stray from the intended course.
While distress can occur even during a completely natural and hands-off labor, it is important to note that any time you interfere with the natural process of labor, you are inviting repercussions. That’s why every single intervention should be weighed in a risks vs. benefits analysis.
One of the most noted side effects of pitocin is fetal distress. Pitocin, which causes unnatural contraction patterns, affect babies differently than normal contractions. Because they are stronger and last longer, they are adding stress to the baby in utero.
Add the epidural. Again, one of the most noted side effects of an epidural is a drop in mother’s blood pressure and decelerated heart rates in babies. And when an epidural is used in conjunction with pitocin, the pitocin is much more likely to be abused. If the mother cannot feel the intensity of the contractions, the medication can be administered in higher doses, without thinking that the baby still is feeling the intensity.
So, to counter the cesarean due to fetal distress, we need to:
 Lower the induction rates! Starting a labor chemically can stress out a baby who isn’t ready for labor, and it can cause stress to a baby due to the intensity of the pitocin-powered contractions.
 Utilize movement in labor! Movement in labor helps a labor to progress, which means less likelihood of having it augmented by pitocin or artificial rupture of membranes. Rupturing the membranes can also increase stress on a baby, as the cushion of water is no longer present and the strength of the uterus squeezing directly on the baby’s head can become harmful after time. Movement also helps to move baby into good positions. Many times women are asked to lie down on the bed and not move in order for the baby’s heart rate to be picked up on the fetal monitor (to ensure that baby is not in distress). The funny thing is, laying down and being still can put baby in a compromising position and cause distress in and of itself! Fetal heart tones can be picked up on a woman upright and moving by holding the monitor to the belly in conjunction to where the baby is during that time.
 Avoid pitocin. Avoid it for induction, avoid it for augmentation. It’s just better to stay away from the stuff.
 Avoid epidural. Having an epidural can slow down contractions which can then lead to augmentation with pitocin. Epidurals in and of themselves can cause fetal heart rate deceleration. Epidurals also prevent a mom from being able to move and when mom lays in one position, babies can get stuck in compromising positions.
 If fetal distress is suspected, fetal scalp sampling can be done to test for true distress in a baby.

11. Maternal Medical Conditions
There are many different medical conditions that cause concern for mothers who are carrying a baby. Some are truly incompatible with labor, some can handle labor if mom is
If there’s a chance for a mom with a medical condition to give birth vaginally, it’s important to keep these in mind:
 healthy eating and a healthy lifestyle prior to conception can make a huge difference in your options once you are pregnant.
 Controlling your medical condition through nutrition, exercise and medications throughout pregnancy can help increase your chances of a normal labor and birth.
 Try labor. See how the mom’s body reacts. Don’t just rule out labor.

12. Baby’s Birth Defects
Some birth defects are incompatible with labor, so cesarean is the best option for these babies. But often times, labor is beneficial for the health and well-being of a baby who has problems, so this is something that a parent needs to really research.
The March of Dimes has gone through a huge effort to help prevent birth defects through education. Good nutrition and a healthy lifestyle prior to conception and throughout pregnancy cuts down on the chances of birth defects, as well as a mother taking the right supplements (i.e. folic acid).


Now that we’ve addressed the top reasons for medically necessary cesareans, we need to figure out the steps to take prior to the cesarean becoming necessary.

1. Nutrition and lifestyle counseling. This should not start *in* pregnancy, this needs to start in infancy! This is a lifelong goal, and not one that should be brought to action only after a woman is pregnant. If a woman is unhealthy when she enters a state of pregnancy, encouraging good health and nutrition still can make a difference, and should occur, but the earlier, the better.
2. Utilize midwifery care. We are seriously lacking in balancing out the specialized practice of obstetrics with practice of caring for normal pregnancy with midwives. The midwifery model of care goes a long way in preventing many of the reasons for cesarean sections, and our nation needs to look seriously at this.
3. Utilize doulas. Because doctors and nurses are kept so busy, doulas are wonderful additions to the labor room. They provide continuous labor support for the mother, father and family. They help the mom with the emotional side of labor and help her through finding her own way. They drastically cut down the medicalized part of labors and help moms get up and moving. Insurance companies would be very, very wise to reimburse families who use doulas. They can greatly reduce the cost of a hospital stay.
4. Train nurses in taking care of laboring women. Because of the high percentage of medicalized births, many nurses do not know the needs of a naturally laboring woman. If cesarean rates are to go down, those who work with laboring mothers need to know how to help them in ways that protect, rather than interfere, with the natural process.

Wednesday, January 20, 2010

Birth

Watching birth videos always makes me cry. Not because of fear, or thoughts of pain, or sympathy. I cry because watching women bring forth life fills me with an overwhelming feeling of awe. Because women are so beautiful, so strong, so amazing.

Tuesday, December 15, 2009

Epidurals at the Door



With an over 95% epidural rate in the area I'm currently living in, most people seem shocked at the idea of taking natural childbirth classes. Obviously, childbirth is about pain, and you want to do everything you can to get rid of that pain!

But here's the cold, hard truth, ladies. An epidural is not a guaranteed thing! Sometimes you have a quick labor. Sometimes something holds you up from getting to the hospital early enough on in labor. Sometimes the anesthesiologist is being utlized for someone else's emergency situation. Just because you sign up for an epidural birth does not mean that you will get one!

So, what happens to a woman who is in labor and finds out that the one basket she has put all her eggs in has crashed to the floor? Every labor has to start sometime, somewhere, and I'm pretty sure most will not be in a hospital room with a catheter already in the back. You will have to cope with contractions at some point.

A woman who knows how the body works and how to work with it is a woman who will experience a lot less anxiety, a lot less panic, and a lot less fear about getting to the hospital in time.

Attending childbirth classes that go over plenty of useful pain coping techniques is essential to every pregnant woman. I've had women who have taken my natural childbirth classes who have ended up on pitocin, had an epidural, gone through a cesarean birth, and every single one has come back to tell me that relaxation techniques were vital to their labor, no matter how it turned out.

Learning how to relax, how to calm down the mind, how to create a setting of safety, how to deal with pain - these are all techniques that are useful in various birthing situations as well as situations outside of the labor room! These are life skills!

Wednesday, May 20, 2009

Working Hard For Normal

Why is it that we must fight so hard for what is normal in birth?

Normal is not what you would find if you took a glimpse into an L&D ward at any hospital around the U.S. Normal is what you'd find if you took a look at birth through history and various cultures around the world.

What is Normal?

Normal is women up and moving in labor.

Normal is women wearing what is comfortable for them in labor.

Normal is women eating when they are hungry and drinking when they are thirsty.

Normal is women being free from wires, lines, pokes, prods, straps, and needles.

Normal is a laboring woman being at the center of the childbearing drama while a group of supporting women surrounds her.

Normal is a woman having instincts and trusting them.

Normal is a familiar room full of peace and love.

Normal is knowing those who are with you in labor.

Normal is a woman knowing that she was made to give birth.

Normal is women rushing with a power that their own bodies provide.

Normal is trusting that birth has a ton of fail-safes set in place.

Normal is understanding that there is a reason for what happens.

Normal is a woman surrendering in labor -- not to others, but to her self.

Normal is knowing that most variances of labor can be handled in a calm and competent manner.

Normal is trusting that mothers are responsible for making decisions for themselves and their babies.

Normal is being touched by loving and caring hands.

Why is this not normal for our country? Because we are all wearing glasses tinted with a film of medical superiority. Instead of normal, we have handed birth over to an atmosphere steeped in danger, fear and pain, where women are martyrs and doctors are saviors.

We need to put on a different set of glasses. We need a shift in paradigm. When viewed in a light that our bodies were made to give birth. That this is something women have done for all time and the human race still exists. That our bodies are capable of growing and delivering a baby into the world. That it is a normal human function. It seems a little ridiculous to create such chaos around every single birth when it is obviously unnecessary.